Article
  • Effect of In Vitro Degradation on the Weight Loss and Tensile Strength of PLA/PEG Melt Blend Fiber
  • Yoon CS, Ji DS
  • In Vitro 분해가 PLA/PEG 용융블렌드 섬유의 무게감량률 및 인장강도에 미치는 영향
  • 윤철수, 지동선
Abstract
PLA/PEG blend fibers composed of poly(lactic acid)(PLA) and poly(ethylene glycol) (PEG) were prepared via melt blending and spinning for bioabsorbable filament sutures. The blend fibers hydrolyzed with the immersion in a phosphate buffer solution at pH 7.4 and 37 ℃ for 1∼8 weeks. The effects of blending time, blend composition, and hydrolysis time on the weight loss and tensile strength of the hydrolyzed blend fibers were investigated. After hydrolysis, the weight loss of the blend fibers increased with increasing PEG content, blending time, and hydrolysis time. The tensile strength and tensile modulus of the blend fibers decreased with increasing PEG content, blending time, and hydrolysis time. Therefore, it can be concluded that the weight loss of the PLA/PEG blend fibers was less than 0.9% even at hydrolysis time of 2 weeks and their strength retentions were over 90%.

PLA와 PEG를 사용하여 용융블렌드 방법으로 PLA/PEG 블렌드 섬유를 제조한 후 in vitro 환경조건인 pH 7.4, 온도 37 ℃의 완충용액에서 1∼8주 동안 가수분해한 다음 무게감량률 및 인장강도 등에 미치는 영향을 검토하였다. 가수분해 시간이 1주에서 8주까지 증가함에 따라 블렌드 시간은 10∼30분으로, PEG 함량은 5∼30 wt%로 증가할수록 PLA/PEG 블렌드 섬유의 무게감량률은 증가하는 경향이, 인장강도 및 인장탄성률은 감소하는 경향이 현저하게 나타남을 확인하였다. 결론적으로 가수분해 시간 2주까지는 PLA/PEG 블렌드 섬유의 무게감량률은 약 0.9% 이내이고 강도유지율은 약 90% 이상을 나타냄으로써 임계상처치유기간 중 양호한 강도가 유지될 수 있음을 확인하였다.

Keywords: poly(lactic acid); poly(ethylene glycol); suture; tensile strength; hydrolysis

References
  • 1. Hong YK, J. Korean Fiber Soc., 28, 3 (1991)
  •  
  • 2. Kim HY, Kim KW, J. Korean Fiber Soc., 33, 828 (1996)
  •  
  • 3. Cho HJ, Chung DJ, An JH, Biomaterials, 25, 3733 (2004)
  •  
  • 4. Tsuji H, Ikada Y, Polym. Degrad. Stabil., 67, 179 (2000)
  •  
  • 5. Aslan S, Calandrelli L, Laurienzo P, Malinconico M, Migliaresi C, J. Mater. Sci., 35(7), 1615 (2000)
  •  
  • 6. Lee DB, J. Korean Fiber Soc., 39, 583 (2002)
  •  
  • 7. Lee MJ, Lee MC, Shin PK, Polym.(Korea), 22(1), 93 (1998)
  •  
  • 8. Lee CW, Oh SW, Kim DC, Lee RY, J. Korean Fiber Soc., 35, 1 (1998)
  •  
  • 9. Cho CG, Woo SW, Choi KL, Kim JH, Polym.(Korea), 21(5), 821 (1997)
  •  
  • 10. Dong Y, Feng SS, Biomaterials, 25, 2843 (2004)
  •  
  • 11. Zhang Y, Feng Z, Feng Q, Cui F, J. Eur. Polym., 40, 1297 (2004)
  •  
  • 12. Hsu SH, Tang CM, Lin CC, Biomaterials, 25, 5593 (2004)
  •  
  • 13. Park SJ, Kim SH, J. Colloid Interface Sci., 271(2), 336 (2004)
  •  
  • 14. Ivanova T, Malzert A, Boury F, Proust JE, Verger R, Panaiotov I, J. Colloid Surfaces B, 32, 307 (2003)
  •  
  • 15. Hu Y, Hu YS, Topolkaraev V, Hiltner A, Baer E, Polymer, 44(19), 5681 (2003)
  •  
  • 16. Lai WC, Liau WB, Lin TT, Polymer, 45(9), 3073 (2004)
  •  
  • 17. Nakane K, Hata Y, Morita K, Ogihara T, Ogata N, J. Appl. Polym. Sci., 94(3), 965 (2004)
  •  
  • 18. Yoon CS, Ji DS, Text. Sci. Eng., 43, 235 (2006)
  •  
  • 19. Duek EAR, Zavaglia CAC, Belangero WD, Polymer, 40(23), 6465 (1999)
  •  
  • 20. Oh JS, Kim HY, Lee SC, Lee DR, Choi KE, J. Korean Fiber Soc., 38, 351 (2001)
  •  
  • 21. Lee SU, Kim HY, Lee DR, Khil MS, J. Korean Fiber Soc., 39, 167 (2002)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2009; 33(6): 581-587

    Published online Nov 25, 2009

  • Received on Jul 8, 2009
  • Accepted on Sep 3, 2009