Article
  • Effect of Film Processing Conditions on the Dimensional Stability of Triacetyl Cellulose Film
  • Kim H, Kim H, Kim H, Cho J, Kim Y, Kang HJ
  • 필름 가공조건이 트리아세틸 셀룰로오스 필름의 치수안정성에 미치는 영향
  • 김효갑, 김홍석, 김한성, 조진식, 김용원, 강호종
Abstract
Effect of solution film processing conditions on the dimensional stability of TAC film which is used as protection film of liquid crystal display (LCD) has been studied under hot and humid environmental condition (65 ℃, 90%). In addition, the mechanical and optical property changes due to the dimensional instability were also investigated. It was found that the fast solvent evaporation due to the increasing of methylene chloride content in solvent mixtures and decreasing dope concentration caused the lowering of dimensional stability under hot and humid condition. This dimensional stability change also affected the mechanical and optical properties of TAC films as well.

액정표시소자(LCD)의 보호필름으로 사용되는 트리아세틸 셀룰로오스(TAC) 용액 필름 가공조건이 TAC 필름 사용 환경에 따른 치수안정성에 미치는 영향을 살펴보았다. 아울러 이러한 치수 안정성의 변화가 필름 기계적 및 광학 특성에 미치는 영향을 함께 살펴보았다. TAC 필름의 용액가공 시 사용되는 methylene chloride/methyl alcohol 혼합용매의 methylene chloride 함량 증가와 필름 dope에 포함된 TAC의 농도 감소에 의하여 TAC 필름 고상화 과정에서 용매의 증발속도가 빨라져 TAC 주사슬의 잔유응력을 유발시킴에 따라 항온항습 조건(65 ℃, 90%)에서 TAC 필름의 치수안정성이 감소됨을 확인할 수 있었으며 이러한 치수안정성의 변화는 필름의 기계적 및 광학적 특성에 영향을 미침을 확인하였다.

Keywords: triacetyl cellulose film; dimensional stability; evaporation condition

References
  • 1. Ryuichi T, Shoichi M, Naoyuki T, Int. J. Appl. Radiat. Isot., 35 (1984)
  •  
  • 2. Nakajama H, Fukagawa N, Nishiura Y, Yasuda T, Ito T, Mihayashi K, J. Photopolym. Sci. Technol., 19, 2 (2006)
  •  
  • 3. Sata H, Murayama M, Shimamoto S, Macromol. Symp., 208, 323 (2004)
  •  
  • 4. Tagaya A, Ohkita H, Mukaoh M, Sakaguchi R, Koike Y, Science, 301, 812 (2003)
  •  
  • 5. Shimamoto S, Gray DG, Cellulose, 6, 15 (1999)
  •  
  • 6. Zakurdaeva NP, Ivanova TA, Fiber Chem., 7, 5 (1976)
  •  
  • 7. Kazakevich YE, Girlyavichyus AA, Strukova IM, Ivanova GV, Emets LV, Vol'f LA, Fiber Chem., 17, 5 (1986)
  •  
  • 8. Kasimova VY, Mnatsakanov SS, Sirota AG, Russ. J. Appl. Chem., 78, 3 (2005)
  •  
  • 9. Arndt P, Bockholt K, Gerdes R, Huschens S, Pyplo J, Redlich H, Samm K, Cellulose, 10, 1 (2003)
  •  
  • 10. Abitbol T, Gray DG, Cellulos, 16, 2 (2009)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2010; 34(2): 133-136

    Published online Mar 25, 2010

  • Received on Oct 25, 2009
  • Accepted on Nov 30, 2009