Article
  • The Electrodeposition on Carbon Materials with In Situ Electrochemical Polymerization of 3-Octylthiophene
  • Jeon JS, Kim JJ, Lee K, Kim JS
  • 3-옥틸티오펜의 전기화학적 중합법에 의한 탄소재료의 표면 전착
  • 전재숙, 김정재, 이경우, 김정수
Abstract
The electrochemical coating of poly(3-octylthiophene) on carbon materials was studied in order to investigate the application possibility of the modified carbon materials in the photoelectronic devices. Commercial carbon paper and carbon fiber were used as substrate electrodes for electrochemical coating. The coating behaviors were analysed with the variation of monomer and electrolyte concentration, applied potential, and cycling number in cyclovoltammetry. The coating rate of poly(3-octylthiophene) formed on the substrate were proportional to the monomer and electrolyte concentration, applied potential, and cycling number with each independent exponent. The structure and morphology of electrochemically polymerized poly(3-octylthiophene) was investigated with scanning electron microscopy and FTIR reflectance measurement.

탄소재료의 표면을 개질하고 이를 광전자 기능소자의 전극 재료로서 응용하는 가능성을 모색하기 위하여 탄소재료의 표면을 폴리(3-옥틸티오펜)으로 전기화학적 방법에 의하여 전착하는 것을 연구하였다. 전착의 기질로 사용되는 탄소재료의 형태로는 시판되는 탄소종이 및 탄소섬유를 택하였으며, 전기중합에 사용되는 단량체의 농도, 전해질의 농도, 인가전압의 변화, 순환전압전류법 사이클 회수를 달리하여 그 영향을 관찰하였다. 단량체의 농도와 전해질 농도의 증가, 인가전압의 증가, 순환전압전류법 사이클 회수의 증가에 따라 탄소종이와 탄소섬유에 중합된 폴리(3-옥틸티오펜)의 양이 증가함을 관찰하였으며, 중합속도에 미치는 영향을 각각의 변수에 대한 지수를 측정해서 분석하였다. 폴리(3-옥틸티오펜)이 중합된 탄소재료의 표면은 주사전자현미경을 통해 관찰하였고 그 구조를 FTIRATR로 분석하였다.

Keywords: electrochemical coating; 3-octylthiophene; carbon material; photoelectronic electrode

References
  • 1. Scotheim TE, Reynolds JRHandbook of Counducting Polymers, CRC Press, Boca Raton (2007)
  •  
  • 2. Pang Y, Li X, Shi G, Jin L, Int. J. Electrochem. Sci., 2, 681 (2007)
  •  
  • 3. Erb T, Raleva S, Zhokhavets U, Gobsch G, Stuhn B, Spode M, Ambacher O, Thin Solid Films, 450(1), 97 (2004)
  •  
  • 4. Al-Ibrahim M, Roth HK, Schroedner M, Konkin A, Zhokhavets U, Gobsch G, Scharff P, Sensfuss S, Org. Electron., 6, 65 (2005)
  •  
  • 5. Chung DDL, J. Mater. Sci., 39(8), 2645 (2004)
  •  
  • 6. Kang SJ, Song Y, Yi Y, Choi WM, Yoon SM, Choi JY, Carbon, 48, 520 (2010)
  •  
  • 7. Kim HJ. Koizhaiganova R, Vasudevan T, Sanjeeviraja C, Lee MS, Polym. Adv. Technol., 20, 736 (2009)
  •  
  • 8. Zhu H, Wei J, Wang K, Wu D, Sol. Energy Mater. Sol. Cells, 93, 1461 (2009)
  •  
  • 9. Gunes S, Neugebauer H, Sariciftci NS, Chem. Rev., 107(4), 1324 (2007)
  •  
  • 10. Min KS, Kim JK, Rhee HW, Kim CY, Polym.(Korea), 17(3), 301 (1993)
  •  
  • 11. Iroh JO, Rajagopalan R, J. Appl. Polym. Sci., 76(10), 1503 (2000)
  •  
  • 12. Wood GA, Iroh JO, Polym. Eng. Sci., 39, 2389 (1996)
  •  
  • 13. Sarac AS, Springer J, Surf. Coat. Technol., 160, 227 (2002)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2010; 34(6): 511-516

    Published online Nov 25, 2010

  • Received on May 10, 2010
  • Accepted on Jul 15, 2010