Article
  • Preparation and Properties of Poly(vinylidene fluoride) Multilayer Films
  • Son TW, Kim JH, Choi WM, Han FF, Kwon OK
  • Poly(vinylidene fluoride) 다층 필름의 제조 및 특성
  • 손태원, 김종환, 최원미, 한비비, 권오경
Abstract
Along with the fast development of electronics, the demands of portable electronics and wireless sensors are growing rapidly. The need for self-powering materials capable of powering the electrical devices attached to them is increasing. The piezoelectric effect of polyvinylidene fluoride (PVDF) can be used for this purpose. PVDF has a special crystal structure consisting of a β-phase that can produce piezoelectricity. In this paper, multilayer PVDF films were fabricated to increase the β-phase content. A solution of 10% concentration N,N-dimethylacetamide (DMAc) in PVDF (PVDF/DMAc) was used to fabricate the films via spin coating technique with the following optimum process parameters: a spin rate of 850 rpm, spin time of 60 s, drying temperature of 60 ℃, and drying time of 30 min. Compared with single-layer PVDF films, the multilayer films exhibited higher β-phase content. The β-phase content of the films increased gradually with increasing number of layers until 4. Maximum ratio of β-phase content was 7.72.

전자 기기의 빠른 발전에 따른 무선 기기들의 사용은 급격히 늘어나고 있다. 그래서 이런 제품에 자가 발전이 가능한 재료를 적용시키는 사례가 점차 늘고 있다. 여기에 사용되는 재료로서 poly(vinylidene fluoride)(PVDF)가 있는데 PVDF는 piezoelectricity를 낼 수 있는 특별한 결정구조인 β-phase를 가지고 있다. 이 논문에서는 piezoelectricity에 결정적인 영향인 β-phase 함량을 증가시키기 위해 다층 PVDF 필름을 제조하였다. 이 PVDF 필름은 용매인 DMAc에 10%로 용해시킨 것으로 spin rate는 850 rpm, spin time은 60초이며 건조온도는 60 ℃이다. 비교적으로 다층 필름은 단일 층보다 더 높은 β-phase함량을 나타내었다. 이 β-phase함량은 4-layer 필름이 되기까지 점차 증가되었으며 최대 함량은 7.72이다.

Keywords: spin coating; PVDF; multilayer film; piezoelectricity.

References
  • 1. Zheng J, He A, Li J, Han CC, Macromol.Rapid Comm., 28, 22 (2007)
  •  
  • 2. Tashiro K, Tadokoro H, Kobayashi M, Ferroelectrics., 32, 1 (1981)
  •  
  • 3. Kim BS, Sang YJ, Polymer(Korea)., 20, 2 (1996)
  •  
  • 4. Kamath GM, Upadhya AR, Smart Materials and Applications, REACH Symposium.Bangalore, March 7-10, p.2 (2007)
  •  
  • 5. Sajkiewicz P, Wasiak A, Goclowski Z, Eur. Polym. J., 35, 3 (1998)
  •  
  • 6. Kymissis J, Kendall C, Paradiso JParasitic Power Harvesting in Shoes, Physics and Media Group MIT Media Laboratory, August (1998)
  •  
  • 7. Granstrom J, Feenstra J, Sodano HA, Farinholt K, Smart Mater. Struct., 16, 1810 (2007)
  •  
  • 8. Sodano HA, Inman DJ, JIMSS., 16, 10 (2005)
  •  
  • 9. Sodano HA, Park G, Inman DJ, An International J.Experimental Mechanics., 40, 2 (2004)
  •  
  • 10. Sodano HA, Inman DJ, Park GH, The Shock and Vibration Digest., 36, 3 (2004)
  •  
  • 11. Klimiec E, Zaraska W, Zaraskak K, Microelectronics Reliability., 48, 6 (2008)
  •  
  • 12. Yiquan Y, Binwen S, Zongjie L, IEEE T Ultrason. Ferr. and Frequency Control., 42, 5 (1995)
  •  
  • 13. Tasaki I, Byrne PM, Masumura M, Jpn. J. Physiol., 37, 4 (1987)
  •  
  • 14. Hwa B, Kim BC, J. Korean Fiber Soc., 41, 6 (2004)
  •  
  • 15. Benz M, Euler WB, Gregory OJ, Macromolecules., 35, 7 (2002)
  •  
  • 16. http://www.clean.cise.columbia.edu/process/spintheory.pdf.
  •  
  • 17. Zhao Z, Li J, Yuan X, Li X, J. Appl. Polym. Sci., 97, 2 (2004)
  •  
  • 18. Benedetti E, Catanorchi S, Alessio AD, Polym. Inter., 41, 1 (1996)
  •  
  • 19. Jiang Y, Ye Y, Yu J, Wu Z, Polym. Eng. Sci., 47, 9 (2007)
  •  
  • 20. Nasir M, Matsumoto H, J. Polym. Sci. Part B: Polym. Phys., 44, 5 (2006)
  •  
  • 21. Choi SW, Kim JR, Ahn YR, Jo SM, Chem.Mater., 19, 1 (2007)
  •  
  • 22. Samatham R, Kim KJ, Polym. Eng. Sci., 46, 7 (2006)
  •  
  • 23. Gregorio RJ, Cestari M, J. Polym. Sci. Part B: Polym.Phys., 32, 5 (1994)
  •  
  • 24. Kim BC, Choi CG, Han SP, Polymer(Korea)., 26, 4 (2002)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2011; 35(2): 130-135

    Published online Mar 25, 2011

  • Received on Sep 9, 2010
  • Accepted on Nov 5, 2010