Article
  • Characterization of Poly(vinyl alcohol) Nanocomposite Films with Various Clays
  • Ham M, Kim JC, Chang JH
  • 다양한 점토를 이용한 폴리(비닐 알코올) 나노 복합체 필름의 특성 연구
  • 함미란, 김정철, 장진해
Abstract
Poly(vinyl alcohol) (PVA) hybrid films containing 5 wt% pristine clay mineral were synthesized in the water solution. The various PVA hybrid films were synthesized from structurally different pristine clays: saponite (SPT), montmorillonite (MMT), hectorite (SWN), hydrophilic bentonite (PGV), and mica (Mica). The thermo-optical properties and morphologies of the PVA hybrid films were evaluated with various pristine clays. The nanostructure of the hybrid films was observed using transmission electron microscopy, which showed that the clay layers were well dispersed into the matrix polymer, although some clusters or agglomerated particles were also detected. The addition of pristine clay was more effective with regard to improving the thermal properties and gas barrier characteristics, whereas the optical transparency of the PVA hybrid films deteriorated with pristine clay.

순수한 점토 5 wt%를 포함하는 poly(vinyl alcohol)(PVA) 나노 복합체 필름을 수용액상에서 합성하였다. 합성된 PVA 복합체 필름에는 구조적으로 각각 다른 사포나이트(SPT), 몬모릴로나이트(MMT), 헥토라이트(SWN), 수용성 벤토나이트(PGV) 및 마이카(Mica) 등의 점토를 사용하였다. 이처럼 여러 가지 순수한 점토가 포함된 PVA 복합체 필름에 대해 열적-광학적 성질 및 모폴로지를 평가하였으며, 전자 현미경을 통해 관찰된 PVA 복합체 필름의 나노 구조에서는 점토가 매트릭스에 잘 분산된 부분도 있었지만, 일부에서는 뭉친 부분도 발견되었다. 점토를 사용한 PVA 복합체 필름의 경우에 열적 성질이나 가스 차단성을 증가시키는 데에는 매우 효과적이었지만, 이와는 반대로 광학 투명성에서는 그렇지 못하였다.

Keywords: poly(vinyl alcohol); clay; nanocomposite; film.

References
  • 1. Bernard J, Favier A, Davis TP, Barner-Kowollik C, Stenzel MH, Polymer, 47(4), 1073 (2006)
  •  
  • 2. Levine M, Iikka G, Weis P, J. Polym. Sci. Part B: Polym.Chem., 2, 915 (1964)
  •  
  • 3. Tadavarthy SM, Moller JH, Amplatz K, Am. J.Roentgenol., 125, 609 (1975)
  •  
  • 4. Chiang WY, Hu CM, J. Appl. Polym. Sci., 30, 4045 (1985)
  •  
  • 5. Wen J, Vasudevan VJ, Wilkes GL, J. Sol-Gel Sci.Technol., 5, 115 (1995)
  •  
  • 6. Huang RYM, Rhim JW, Polym. Int., 30, 129 (1993)
  •  
  • 7. Ham SK, Jung MH, Chang JH, Polym.(Korea), 30(4), 298 (2006)
  •  
  • 8. Nakane K, Yamashita T, Iwakura K, Suzuki F, J. Appl. Polym. Sci., 74(1), 133 (1999)
  •  
  • 9. Sakurada I, Poly(vinyl alcohol) Fibers, Marcel Dekker, New York (1985)
  •  
  • 10. Chuang WY, Young TH, Chiu WY, Lin CY, Polymer, 41(15), 5633 (2000)
  •  
  • 11. Fukushima Y, Inagaki S, Incl. Phenom., 5, 473 (1987)
  •  
  • 12. Giannelis EP, Adv. Mater., 8(1), 29 (1996)
  •  
  • 13. Srikhirin T, Moet A, Lando JB, Polym. Adv. Tech., 9, 491 (1998)
  •  
  • 14. Choi YS, Chung IJ, Korean Chem. Eng. Res., 46(1), 23 (2008)
  •  
  • 15. Lebaron PC, Wang Z, Pinnavaia TJ, Appl. Clay Sci., 15, 11 (1999)
  •  
  • 16. Messersmith PB, Giannelis EP, Chem. Mater., 5, 1064 (1993)
  •  
  • 17. Kojima Y, Usuki A, Kawasumi M, Okada A, J. Mater.Res., 8, 1185 (1993)
  •  
  • 18. Gilman JW, Appl. Clay Sci., 15, 31 (1999)
  •  
  • 19. Shi D, Yu W, Li RKY, Ke Z, Yin J, Eur. Polym. J., 43, 3250 (2007)
  •  
  • 20. Chang JH, Jang TG, Ihn KJ, Lee WK, Sur GS, J. Appl. Polym. Sci., 90(12), 3208 (2003)
  •  
  • 21. Strawhecker KE, Manias E, Chem. Mater., 12, 2943 (2000)
  •  
  • 22. Chang JH, “Permeation Properties of Water-Soluble Polymer Nanocomposite Systems”, in Barrier Properties of Polymer Clay Nanocomposites, Vikas Mittal, Editor, Nova Science Publishers, Inc., Chapter 6, 117 (2009)
  •  
  • 23. Yu YH, Lin CY, Yeh JM, Lin WH, Polymer, 44(12), 3553 (2003)
  •  
  • 24. Suzuki F, Nakane K, Piao JS, J. Mater. Sci., 31(5), 1335 (1996)
  •  
  • 25. Legaly G, Developments in Ionic Polymers, Elsevier, London, 2, 77 (1986)
  •  
  • 26. Legaly G, Appl. Clay Sci., 15, 1 (1999)
  •  
  • 27. Vendamme R, Onoue SY, Nakao A, Kunitake T, Nature Mater., 5, 494 (2006)
  •  
  • 28. Haraguchi K, Ebato M, Takehisa T, Adv. Mater., 18(17), 2250 (2006)
  •  
  • 29. Yeun JH, Bang GS, Park BJ, Ham SK, Chang JH, J. Appl. Polym. Sci., 101(1), 591 (2006)
  •  
  • 30. Jang SW, Chang JH, Polym.(Korea), 31(3), 221 (2007)
  •  
  • 31. Shin J, Ham M, Kim JC, Ch JH, Polym.(Korea), 35(5), 402 (2011)
  •  
  • 32. Jaynes WF, Bigham JM, Clays & Clay Minerals., 35, 440 (1987)
  •  
  • 33. Hsiao SH, Liou GS, Chang LM, J. Appl. Polym. Sci., 80(11), 2067 (2001)
  •  
  • 34. Chang JH, Kim SJ, Im S, Polymer, 45(15), 5171 (2004)
  •  
  • 35. Morgan AB, Gilman JW, J. Appl. Polym. Sci., 87(8), 1329 (2003)
  •  
  • 36. Galgali G, Ramesh C, Lele A, Macromolecules, 34(4), 852 (2001)
  •  
  • 37. Chen TK, Tien YI, Wei KH, Polymer, 41(4), 1345 (2000)
  •  
  • 38. Kumar S, Jog JP, Natarajan U, J. Appl. Polym. Sci., 89(5), 1186 (2003)
  •  
  • 39. Chang JH, Mun MK, Lee IC, J. Appl. Polym. Sci., 98(5), 2009 (2005)
  •  
  • 40. Fornes TD, Yoon PJ, Hunter DL, Keskkula H, Paul DR, Polymer, 43(22), 5915 (2002)
  •  
  • 41. Frischer HR, Gielgens LH, Koster TPM, Acta Polym., 50, 122 (1999)
  •  
  • 42. Bharadwaj RK, Macromolecules, 34(26), 9189 (2001)
  •  
  • 43. Jarus D, Hiltner A, Baer E, Polymer, 43(8), 2401 (2002)
  •  
  • 44. Weinkauf DH, Paul DREffect of Structural Order on Barrier Properties, American Chemical Society, Washington, DC (1990)
  •  
  • 45. Joly C, Smaihi M, Porcar L, Noble RD, Chem. Mater., 11, 2331 (1999)
  •  
  • 46. Sinha Ray S, Okamoto M, Prog. Polym. Sci., 28, 1539 (2003)
  •  
  • 47. Chang JH, Park KM, Polym. Eng. Sci., 41(12), 2226 (2001)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2023 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2013; 37(2): 225-231

    Published online Mar 25, 2013

  • Received on Nov 25, 2012
  • Accepted on Jan 8, 2013