Article
  • Single-molecule Alkylation of Isoparaffin Using Peroxide Initiator for Making Synthetic Lubricant
  • Khadka R, Lee SW, Kim YW, Ryu JW, Yim JH
  • 합성 윤활유 제조를 위한 퍼옥사이드계 개시제를 이용한 이소파라핀의 단독 알킬레이션
  • 카드카 로산, 이상우, 김용운, 유재욱, 임진형
Abstract
Polyalphaolefin (PAO) is a synthetic lubricant that is superior to mineral-based lubricants in terms of physical and chemical characteristics such as low pour point (PP), and high viscosity index (VI). This paper first reports a novel preparation route for a synthetic lubricant via alkylation of isoparaffins using a peroxide initiator without olefin. Alkylation of three kinds of isoparaffins such as i-C16, i-C18, and i-C23 as well as alkylation of i-C18 with 2-pentene using di-tert butyl peroxide initiator were conducted under various conditions to confirm alkylation reaction from isoparaffins themselves i.e; Single-molecule alkylation. Various properties of each alkylates (VI and PP) were investigated as a synthetic lubricant. Single-molecule alkylation made from i-C16 a,nd i-C18 showed ultra high VI (>140) and low PP (<-30 ℃).

폴리알파올레핀은 낮은 유동점, 높은 점도지수와 같은 물리화학적 특성이 기존의 광유보다 우수한 합성윤활유이다. 본 논문은 퍼옥사이드계 개시제를 이용하여 올레핀을 사용하지 않고 이소파라핀 분자간의 알킬레이션 반응을 통한 합성 윤활유 제조에 관한 새로운 경로를 제시한다. 평균 탄소수가 i-C16, i-C18, 그리고 i-C23인 세가지 장쇄 이소파라핀의 알킬레이션과 i-C18과 2-pentene의 알킬레이션을 di-tert butyl peroxide 라디칼 개시제를 사용하여 여러가지 반응조건에서 수행하여 단독 알킬레이션 반응 경로를 확인하였다. 세가지 유분으로 제조된 알킬레이트를 합성 윤활유로의 적용 가능성을 알아보기 위하여 동점도, 점도지수, 및 유동점을 조사하였다. i-C16 및 i-C18 유분으로 제조된 단독 알킬레이트는 극초고점도지수(>140)와 낮은 유동점(<-30 ℃)을 보였다.

Keywords: alkylation; lubricant; polyalphaolefin; iso-paraffin; viscosity index.

References
  • 1. Rao CNR, Sood AK, Subrahmanyam KS, Govindaraj A, Angew. Chem. Int. Ed., 48, 7752 (2009). Benda R, Bullen J, Plomer A, J. Syn. Lub., 13, 41 (1996)
  •  
  • 2. Murphy MR, Blain DA, Galiano-Roth AS, J. Syn. Lub., 18, 301 (2002)
  •  
  • 3. Linn CB, Grosse AV, Ind. Eng. Chem., 37, 924 (1945)
  •  
  • 4. Albright LF, Wood KV, Ind. Eng. Chem. Res., 36(6), 2110 (1997)
  •  
  • 5. Aschauer SJ, Jess A, Ind. Eng. Chem. Res., 51(50), 16288 (2012)
  •  
  • 6. Hommeltoft SI, U.S. Patent 7,923,594 (2011)
  •  
  • 7. Rosenbach N, Mota CJA, J. Braz. Chem. Soc., 16, 691 (2005)
  •  
  • 8. Feller A, Barth JO, Guzman A, Zuazo I, Lercher JA, J. Catal., 220(1), 192 (2003)
  •  
  • 9. Nayak SV, Ramachandran PA, Dudukovic MP, Chem. Eng. Sci., 65(1), 335 (2010)
  •  
  • 10. Elomari S, U.S. Patent 7,7569,740 (2009)
  •  
  • 11. Le QN, Ware RA, Wong SS, U.S. Patent 4,990,713 (1991)
  •  
  • 12. Faraj MK, U.S. Patent 5,488,176 (1996)
  •  
  • 13. Dickey FH, Raley JH, Rust FF, Treseder RS, Vaughan WE, Ind. Eng. Chem., 41, 1673 (1949)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2014; 38(4): 496-501

    Published online Jul 25, 2014

  • Received on Jan 21, 2014
  • Accepted on Mar 7, 2014