Article
  • Isothermal Crystallization Kinetics of Quaternary Ammonium Group Grafted Polypropylene
  • Liu G
  • 제4암모늄기의 곁가지를 가지는 폴리프로필렌에서 등온결정화속도
Abstract
In this paper, the isothermal crystallization kinetics of a functional PP (FPP) with different grafting yields (GY)-methacryloxyethyltrimethyl ammonium chloride (DMC) grafted PP were investigated by differential scanning calorimetry (DSC). The results showed that the crystallization rate of FPP (GY=4.83%) was the highest for all of the studied samples. Furthermore, for the FPP with different GY, the value of t1/2 became longer with increasing the grafting yield (GY). The possible explanation was that the quaternary ammonium groups introduced affected the crystallization process of the FPP in two opposite directions, i.e. promoting the nucleation and hindering the transport of the chain molecules towards the growing nuclei. Polarized optical micrographs showed that the DMC chains acted as nucleating agents, which accelerated the nucleation. In addition, the results showed the FPP had lower nucleation free energy than the PP. This study would be useful for designing the processing parameters of the grafted samples.

Keywords: crystallization; kinetics; methacryloxyethyltrimethyl ammonium; grafted; polypropylene.

References
  • 1. Ning P, Chen ZO, Ren L, J. South China Univ. Techno. (Nat. Sci. Ed.), 29, 77 (2001)
  •  
  • 2. Miyauchi K, Saito K, Polymer, 52(16), 3519 (2011)
  •  
  • 3. Kim DJ, Jeon IR, Park HY, Seo KH, Polym.(Korea), 37(6), 753 (2013)
  •  
  • 4. Angel CG, Carmen AL, Cristina T, Angel C, Emilio B, Acta Biomater., 7, 996 (2011)
  •  
  • 5. Yoon KH, Shin DY, Kim YC, Polym.(Korea), 36(2), 245 (2012)
  •  
  • 6. Choi K, Lee HS, Kang BC, Yang H, Polym.(Korea), 34(4), 294 (2010)
  •  
  • 7. Lonkar SP, Morlat-Therias S, Caperaa N, Leroux F, Gardette JL, Singh RP, Polymer, 50(6), 1505 (2009)
  •  
  • 8. Svoboda P, Svobodova D, Slobodian P, Ougizawa T, Inoue T, Wang J, Dou Q, Polym. Test., 28, 215 (2009)
  •  
  • 9. Svoboda P, Trivedi K, Svobodova D, Mokrejs P, Vasek V, Mori K, Ougizawa T, Inoue T, Mater. Chem. Phys., 131(1-2), 84 (2011)
  •  
  • 10. Choi K, Lee HS, Kang BC, Yang H, Polym.(Korea), 34(4), 294 (2010)
  •  
  • 11. Jung S, Kim IW, Polym.(Korea), 37(5), 663 (2013)
  •  
  • 12. Liu GT, Zhao MS, Iran Polym. J., 18, 581 (2009)
  •  
  • 13. Varga J, “Crystallization, Melting and Supermolecular Structure of Isotactic Polypropylene”, in Polypropylene: Structure, Blends and Composites, Kocsis JK, Editor, Chapman and Hall, London, Chap. 3, p 56 (1995)
  •  
  • 14. Galeski A, “Nucleation of Polypropylene”, in Polypropylene: Structure, Blends and Composites, Kocsis JK, Editor, Chapman and Hall, London, Chap. 4, p 116 (1995)
  •  
  • 15. Avrami M, J. Chem. Phys., 7, 1103 (1939)
  •  
  • 16. Avrami M, J. Chem. Phys., 9, 117 (1941)
  •  
  • 17. Janimak JJ, Cheng SZD, Zhang AQ, Hsieh ET, Polymer, 33, 728 (1992)
  •  
  • 18. Yu J, He J, Polymer, 41(3), 891 (2000)
  •  
  • 19. Zhang Y, Jiang XL, Guan Y, Zheng AN, Mater. Lett., 59, 3626 (2005)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2015; 39(2): 268-274

    Published online Mar 25, 2015

  • Received on Jun 23, 2014
  • Accepted on Aug 29, 2014