Article
  • Preparation and Properties of Electrically Conductive Polystyrene/Silver Nanowire Nanocomposites
  • Na HY, Sureshkumar M, Lee SJ
  • 전기 전도성 폴리스티렌/은 나노와이어 나노복합재료의 제조 및 물성
  • 나효열, Sureshkumar M, 이성재
Abstract
Silver nanowire (AgNW) is an excellent electrically conductive nanofiller having high purity and high aspect ratio. In this study, we prepared the nanocomposites composed of polystyrene (PS) and AgNWs by coagulated precipitation and investigated their rheological and electrical properties. AgNWs used in the nanocomposites were synthesized by polyol method, where the average size of the AgNWs was 110 nm in diameter and 35 μm in length. Rheological properties of the PS/AgNW nanocomposites were analyzed with complex viscosity and storage modulus. The rheological percolation threshold showing distinct change in microstructure was AgNW 0.50 vol%. This microstructural change can be attributed to the network formation between AgNW-PS chain and between AgNW-AgNW. The electrical conductivity was abruptly increased by forming network structure between AgNW-AgNW with increasing AgNWs. Electrical percolation threshold was 0.54 vol%, and the conductivity was as high as 103 S/m at 2 vol%.

은 나노와이어(AgNW)는 높은 형상비와 순도를 지닌 전기 전도성이 매우 우수한 나노필러이다. 본 연구에서 는 폴리스티렌(PS)과 AgNW로 구성된 나노복합재료를 응고침전법으로 제조한 후 나노복합재료의 유변물성 및 전기적 물성에 대해 고찰하였다. PS/AgNW 나노복합재료의 제조에 사용한 AgNW는 폴리올 방법으로 합성하였는데 합성한 AgNW의 평균 크기는 직경 110 nm와 길이 35 μm이었다. PS/AgNW 나노복합재료의 유변물성은 복소 점도 및 저장 탄성률로 해석하였다. 미세구조의 뚜렷한 변화를 보여주기 시작하는 유변학적 임계농도는 AgNW 0.50 vol% 로 나타났다. 이러한 미세구조의 변화는 AgNW와 PS 사슬, AgNW간의 네트워크 형성에 따른 결과로 추론된다. 전기 전도도로 평가한 전기적 물성은 AgNW 첨가에 따라 AgNW간의 네트워크 구조가 형성되면서 급격히 증가하였다. 전기적 임계농도는 AgNW 0.54 vol%에서 나타났으며, 2 vol%에서의 전기 전도도는 약 103 S/m이었다.

Keywords: nanocomposite; silver nanowire; rheological properties; electrical properties; percolation threshold

References
  • 1. Ray SS, Okamoto M, Prog. Polym. Sci, 28, 1539 (2003)
  •  
  • 2. Thostenson ET, Li C, Chou TW, Compos. Sci. Technol., 65, 491 (2005)
  •  
  • 3. Xie XL, Mai YW, Zhou XP, Mater. Sci. Eng. R-Rep., 49, 89 (2005)
  •  
  • 4. Szleifer I, Yerushalmi-Rozen R, Polymer, 46(19), 7803 (2005)
  •  
  • 5. Gelves GA, Sundararaj U, Haber JA, Macromol. Rapid Commun., 26(21), 1677 (2005)
  •  
  • 6. Nam S, Cho HW, Lim S, Kim D, Kim H, Sung BJ, ACS Nano, 7, 851 (2013)
  •  
  • 7. White SI, Mutiso RM, Vora PM, Jahnke D, Hsu S, Kikkawa JM, Li J, Fischer JE, Winey KI, Adv. Funct. Mater., 20(16), 2709 (2010)
  •  
  • 8. Rao CNR, Deepak FL, Gundiah G, Govindaraj A, Prog. Solid State Chem., 31, 5 (2003)
  •  
  • 9. Chung DDL, J. Mater. Sci., 39(8), 2645 (2004)
  •  
  • 10. Colbert DT, Plastics, Additives Compounding, 5, 18 (2003)
  •  
  • 11. Zach MP, Ng KH, Penner RM, Science, 290, 2120 (2000)
  •  
  • 12. Zhang QM, Li Y, Xu DS, Gu ZN, J. Mater. Sci. Lett., 20(10), 925 (2001)
  •  
  • 13. Makita Y, Ikai O, Ookubo A, Ooi K, Chem. Lett., 31(9), 928 (2002)
  •  
  • 14. Barbic M, Mock JJ, Smith DR, Schultz S, J. Appl. Phys., 91, 9341 (2002)
  •  
  • 15. Coskun S, Aksoy B, Unalan HE, Cryst. Growth Des., 11, 4963 (2011)
  •  
  • 16. Schuette WM, Buhro WE, ACS Nano, 7, 3844 (2013)
  •  
  • 17. Lee JH, Lee P, Lee D, Lee SS, Ko SH, Cryst. Growth Des., 12, 5598 (2012)
  •  
  • 18. Hu GJ, Zhao CG, Zhang SM, Yang MS, Wang ZG, Polymer, 47(1), 480 (2006)
  •  
  • 19. Zhang Z, Zhao B, Hu L, J. Solid State Chem., 121, 105 (1996)
  •  
  • 20. Abid JP, Wark AW, Brevet PF, Girault HH, Chem. Commun., 7, 792 (2002)
  •  
  • 21. Rogach AL, Talapin DV, Shevchenko EV, Kornowski A, Haase M, Weller H, Adv. Funct. Mater., 12(10), 653 (2002)
  •  
  • 22. Kottmann JP, Martin OJF, Smith DR, Schultz S, Opt. Express, 6, 213 (2000)
  •  
  • 23. Kottmann JP, Martin OJF, Smith DR, Schultz S, Phys. Rev. B, 64, 235402 (2001)
  •  
  • 24. Chen DL, Gao L, J. Cryst. Growth, 264(1-3), 216 (2004)
  •  
  • 25. Maillard M, Giorgio S, Pileni MP, Adv. Mater., 14(15), 1084 (2002)
  •  
  • 26. Wu B, Heidelberg A, Boland JJ, Sun XM, Li YD, Nano Lett., 6, 468 (2006)
  •  
  • 27. Liu S, Sun B, Li JG, Chen J, Cryst. Eng. Comm., 16, 244 (2014)
  •  
  • 28. Sun Y, Yin Y, Mayers BT, Herricks T, Xia Y, Chem. Mater., 14, 4736 (2002)
  •  
  • 29. Mao H, Feng J, Ma X, Wu C, Zhao X, J. Nanopart. Res., 14, 887 (2012)
  •  
  • 30. Lin B, Gelves GA, Haber JA, Sundararaj U, Ind. Eng. Chem. Res., 46(8), 2481 (2007)
  •  
  • 31. Potschke P, Abdel-Goad M, Alig I, Dudkin S, Lellinger D, Polymer, 45(26), 8863 (2004)
  •  
  • 32. Du FM, Scogna RC, Zhou W, Brand S, Fischer JE, Winey KI, Macromolecules, 37(24), 9048 (2004)
  •  
  • 33. Potschke P, Bhattacharyya AR, Janke A, Carbon, 42, 965 (2004)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2015; 39(4): 655-661

    Published online Jul 25, 2015

  • 10.7317/pk.2015.39.4.655
  • Received on Jan 19, 2015
  • Accepted on Feb 26, 2015