Article
  • Investigation of Optimum Amino Group Introduction Conditions to Microcrystalline Cellulose (MCC) Surface by Silanization
  • Kim H, Park S, Yang Y, Lim KH, Ha KR
  • Microcrystalline Cellulose(MCC) 표면에 아미노기 도입을 위한 최적 개질 조건 연구
  • 김한나, 박성환, 양여경, 임광희, 하기룡
Abstract
In this study, we carried out research to introduce amino groups on the microcrystalline cellulose (MCC) surface using 3-aminopropyltriethoxysilane (APS). We studied effects of solvent composition, concentration of APS, swell time, reaction time and reaction temperature on the degree of surface modification of MCC. We measured the degree of surface modification of MCC using Fourier transform infrared spectroscopy (FTIR), elemental analysis (EA), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) techniques. It was found that the amount of surface modification by amino functional groups increased as the amount of APS, swell time, reaction time and reaction temperature were increased.

본 연구에서는 microcrystalline cellulose(MCC) 표면에 3-aminopropyltriethoxysilane(APS)를 사용하여 아미노기를 도입하는 연구를 수행하였다. 용매의 조성, APS 투입량, 팽윤시간, 반응시간 및 반응온도를 변화시켜, 각각의 반응조건이 MCC의 표면 개질 정도에 미치는 영향을 연구하였다. APS에 의한 MCC 개질 정도를 Fourier transform infrared spectroscopy(FTIR), elemental analysis(EA), X-ray photoelectron spectroscopy(XPS)와 X-ray diffraction (XRD) 분석법을 사용하여 측정하였다. APS 투입량, 팽윤시간, 반응시간과 반응온도가 증가할수록 MCC 표면에 도입되는 아미노기가 증가함을 확인하였다.

Keywords: microcrystalline cellulose (MCC); silane coupling agent; surface modification; (3-aminopropyl)triethoxysilane (APS)

References
  • 1. Ahn SH, Kim DS, Polym. Korea, 38, 129 (2013)
  •  
  • 2. Jang SY, Kim DS, Polym. Korea, 39, 130 (2014)
  •  
  • 3. Bledzki AK, Gassan J, Prog. Polym. Sci, 24, 221 (1999)
  •  
  • 4. Sung YJ, Lee YJ, Lee JW, Kim SB, Park GS, Shin SJ, Polym. Korea, 42, 56 (2010)
  •  
  • 5. Lee JH, Lim JH, Kim KY, Kim KM, Polym. Korea, 38, 74 (2013)
  •  
  • 6. Paquet O, Krouit M, Bras J, Thielemans W, Belgacem MN, Acta Mater., 58, 792 (2010)
  •  
  • 7. Belgacem MN, Salon-Brochier MC, Krouit M, Bras J, J. Adhes. Sci. Technol., 25(6-7), 661 (2011)
  •  
  • 8. Motokawa T, Makino M, Enomoto-Rogers Y, Kawaguchi T, Ohura T, Iwata T, Sakaguchi M, Adv. Powder Technol., 26(5), 1383 (2015)
  •  
  • 9. Lee S, Ha K, Polym. Korea, 37(6), 777 (2013)
  •  
  • 10. Song SK, Kim JH, Hwang KS, Ha K, Polym. Korea, 49, 181 (2010)
  •  
  • 11. Yeo JS, Seong DW, Hwang SH, Elast. Compos., 50, 62 (2015)
  •  
  • 12. Yoo TW, Woo JS, Ji J, Lee BM, Kim SS, Biomater. Res., 16, 32 (2012)
  •  
  • 13. Abdelmouleh M, Boufi S, Belgacem MN, Dufresne A, Gandini A, J. Appl. Polym. Sci., 98(3), 974 (2005)
  •  
  • 14. Abdelmouleh M, Boufi S, ben Salah A, Belgacem MN, Gandini A, Langmuir, 18(8), 3203 (2002)
  •  
  • 15. Salon MCB, Gerbaud G, Abdelmouleh M, Bruzzese C, Boufi S, Belgacem MN, Magn. Reson. Chem., 45, 473 (2007)
  •  
  • 16. Girones J, Mendez JA, Boufi S, Vilaseca F, Mutje P, J. Appl. Polym. Sci., 103(6), 3706 (2007)
  •  
  • 17. Oh MJ, Lee H, Paik KH, J. Korea TAPPI, 42, 1 (2010)
  •  
  • 18. Abdelmouleh M, Boufi S, Belgacem MN, Duarte AP, Salah AB, Gandini A, Int. J. Adhes. Adhes., 24, 43 (2004)
  •  
  • 19. Mishra SP, A Textbook of Fibre Science and Technology, New Age International Pvt. Ltd. Publishers, New Delhi, p 59 (2000).
  •  
  • 20. Arkles B, Silane Coupling Agents: Connecting Across Boundaries, 3rd Edition, Gelest, Inc., p 3 (2014).
  •  
  • 21. Terinte N, Ibbett F, Schuster KC, Lenzinger Berichte, 89, 118 (2011)
  •  
  • 22. Park S, Baker JO, Himmel ME, Parilla PA, Johnson DK, Biotechnol. Biofuels, 3, 10 (2010)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 2016; 40(6): 925-932

    Published online Nov 25, 2016

  • 10.7317/pk.2016.40.6.925
  • Received on May 31, 2016
  • Accepted on Jun 30, 2016