Article
  • Synthesis of New Polyamides from p-(p-Aminobenzamido)Phenyl-p-Aminobenzoate Monomer
  • Suh HS, Kim JI
  • p-(p-Aminobenzamido)phenyl-p-aminibenzoate를 모노머로 사용한 새로운 폴리아미드의 합성
  • 서홍석, 김진일
Abstract
New polyesteramide, poly(amide-ester)terephthalamide (PAET), poly(amide-ester) succinylamide(PAESu), poly(amide-ester) adipamide(PAEAd), poly(amide-ester)suberoylamide (PAESb) and poly(amide-ester) sebacoylamide(PAESe) were synthesized from aromatic (amide-ester)diamine and several dibasic chlorides by solution polycondensation. In the case of PAESu, PAEAd, PAESb and PAESe including aliphatic chains, the degree of polymerization wag not affected by the addition of lithium chloride : However, in the case of PAET, the degree of polymerization was greatly affected by addition of lithium chloride. According to thermogravimetric analysis, the decomposition of PAESu, PAEAd, PAESb and PAESe was initiated in the vicinity of foot, but PAET showed good thermal stability with initial decomposition temperature of above 540℃.

N-(p-아미노벤즈아미도)페닐 p-아미노벤조에이트와 방향족 및 지방족 이염기산 클로리드를 용액축중합하여 폴리아미드에스테르테레프탈아미드(PAET), 폴리아미드에스테르 숙신아미드(PAESu), 폴리아미드에스테르아디프아미드(PAEAd), 폴리아미드에스테르수베르아미드(PAESb) 및 폴리아미드에스테르세바크아미드(PAESe)를 합성하였다. N-(p-아미노벤즈아미도)페닐 p-아미노벤조에이트는 p-아미노페놀과 4-니트로벤조일클로리드로부터 얻은 N-(p-니트로벤즈아미도)페닐 p-니트로벤조에이트를 환원시켜 합성하였다. PAESu, PAEAd, PAESb 및 PAESe의 경우에는 리튬클로리드를 첨가해도 중합로에 영향을 주지 않았으나, PAET의 경우에는 중합시 용매에 리튬클로리드를 첨가함으로써 중합도를 올릴 수 있었다. 열중량분석에서는 PAESu, PAEAd, PAESb 및 PAESe의 경우 400℃ 정도의 초기분해온도를 나타내었으며, PAET의 경우 초기분해온도가 540℃로서 매우 우수한 열안정성을 나타내었다.

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1988; 12(1): 47-55

    Published online Feb 25, 1988