Article
  • Synthesis, Structural Studies and Blood Compatibility of AB Block Copolymers Consisting of Poly(γ-methyl L-glutamate) as the A Component and Poly(propylene oxide) as the B Component
  • Cho CS, Song SC, Suh SP, Kim KY, Jang SW, Sung YK
  • Poly(γ-methyl L-glutamate)와 Poly(propylene oxide)로 된 Diblock 공중합체의 합성, 구조 연구 및 혈액적합성에 관한 연구
  • 조종수, 송수창, 서순팔, 김계용, 장성욱, 성용길
Abstract
A-B type block copolymer composed of poly(γ-methyl L-glutamate) (PMLG) as the A component and poly(propylene oxide) (PPO) as the B component was obtained by polymerization of γ-methyl L-glutamate N-carboxy anhydride, initiated by triamine- terminated poly(propylene oxide). From circular dichroism measurements of the block copolymer in trifluoroethanol solution as well as from infrared spectra in the solid state, it was found that the polypeptide block exists in the α-helical conformation, as that in PMLG homopolymer. Wide-angle X-ray diffraction patterns for the block copolymers show basically similar reflection to the PMLG homopolymer. Platelets adhesion on the PMLG/PPO block copolymer surfaces was examined by a microsphere column method using whole blood. The number of platelets adhered from whole blood was smaller for the block copolymer surfaces than for the homopolymer and for the bare glass. The shape of the platelets adhered on the polymer surfaces was observed with a scanning electron microscope.

PMLG를 A성분으로 하고 PPO를 B성분으로 하는 A-B형 블록공중합체는 PPO의 말단에 있는 아미노기가 γ-MLG NCA 에의 친핵성첨가 메카니즘에 의해 합성되었다. TFE 용매에서의 원이색성 분광측정과 고체상태에서의 적외선 분광측정으로부터 이중합체가 PMLG homopolymers와 같은 전형적인 γ-helix 구조를 가지고 있음을 알 수 있었다. Wide angle X-ray diffraction pattern으로 부터는 이 공중합체가 PMLG homopolymer와 같은 결정 구조를 가지고 있음을 알 수 있었다. 블록 공중합체표면에서의 혈소판의 점착거동은 사람의 혈액을 사용한 microsphere column method에 의해 검토되었는데 47mo1% 이하의 PPO를 갖는 블록 공중합체표면에서의 혈소판의 점착은 PMLG homopolymer나 glass 표면에서 보다 적었음을 알 수 있었다. 그리고 PMLG homopolymer 표면에 점착된 혈소판의 형태는 블록 공중합체에 비해 많은 의족과 형태변화가 관찰되었다.

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1989; 13(8): 657-664

    Published online Sep 25, 1989