• Effect of Soybean Oil-Treatment of Wood Flour on the Physical Properties of PP/Wood Flour Composites
  • Jongbin Baek and Dae Su Kim†

  • Department of Chemical Engineering, Chungbuk National University, 1 Chungdaero, Seowongu, Cheongju, Chungbuk 28644, Korea

  • 목분의 콩기름 처리가 PP/목분 복합재료의 물성에 미치는 영향
  • 백종빈 · 김대수†

  • 충북대학교 공과대학 화학공학과

  • Reproduction, stored in a retrieval system, or transmitted in any form of any part of this publication is permitted only by written permission from the Polymer Society of Korea.

References
  • 1. Adhikary, B. A.; Pang, S.; Staiger, M. P. Dimensional Stability and Mechanical Behaviour of Wood–plastic Composites Based on Recycled and Virgin High-density Polyethylene (HDPE). Compos. Part B. Eng. 2008, 39, 807-815.
  •  
  • 2. Oksman, K.; Clemons, C. Mechanical Properties and Morphology of Impact Modified Polypropylene–wood Flour Composites. J. Appl. Polym. Sci. 1998, 67, 1503-1513.
  •  
  • 3. Yu, Y.; Yang, Y.; Murakami, M.; Nomura, M.; Hamada, H. Physical and Mechanical Properties of Injection-molded Wood Powder Thermoplastic Composites. Adv. Compos. Mater. 2013, 22, 425-435.
  •  
  • 4. Bledzki, A. K.; Reihmane, S.; Gassan, J. Thermoplastics Reinforced with Wood Fillers: A Literature Review. Polym. Plast. Technol. Eng. 1998, 37, 451-468.
  •  
  • 5. Bledzki, A. K.; Gassan, J. Composites Reinforced with Cellulose Based Fibres. Prog. Polym. Sci. 1999, 24, 221-274.
  •  
  • 6. Panaitescu, D. M.; Donescu, D.; Bercu, C.; Vuluga, D. M.; Iorga, M.; Ghiurea, M. Polymer Composites with Cellulose Microfibrils. Polym. Eng. Sci. 2007, 47, 1228-1234.
  •  
  • 7. Zabihzadeh, S. M. Influence of Plastic Type and Compatibilizer on Thermal Properties of Wheat Straw Flour/Thermoplastic Composites. J. Thermoplast. Compos. Mater. 2010, 23, 817-826.
  •  
  • 8. Ahn, S. H.; Kim, D. S. Effects of Melt-blending Condition and Additives on Mechanical Properties of Wood/PP Composites. Polym. Korea 2013, 37, 204-210.
  •  
  • 9. Park, B. D.; Balatinecz, J. J. Effects of Impact Modification on the Mechanical Properties of Wood-Fiber Thermoplastic Composites with High Impact Polypropylene (HIPP). J. Thermoplast. Compos. Mater. 1996, 9, 342-364.
  •  
  • 10. Rozman, H. D.; Lai, C. Y.; Ismail, H.; Ishak, Z. The Effect of Coupling Agents on the Mechanical and Physical Properties of Oil Palm Empty Fruit Bunch–polypropylene Composites. Polym. Int. 2000, 49, 1273-1278.
  •  
  • 11. Joseph, K.; Thomas, S.; Pavithran, C. Effect of Chemical Treatment on the Tensile Properties of Short Sisal Fiber-Reinforced Polyethylene Composites. Polymer 1996, 37, 5139-5149.
  •  
  • 12. George, J.; Sreekala, M. S.; Thomas, S. A Review on Interface Modification and Characterization of Natural Fiber Reinforced Plastic Composites. Polym. Eng. Sci. 2001, 41, 1471-1485.
  •  
  • 13. Wang, Y.; Cao, J.; Zhu, L. Stress Relaxation of Wood Flour/polypropylene Composites at Room Temperature. Wood Fiber Sci. 2011, 43, 262-270.
  •  
  • 14. Felix, J. M.; Gatenholm, P. J. Formation of Entanglements at Brushlike Interfaces in Cellulose–polymer Composites. J. Appl. Polym. Sci. 1993, 50, 699-708.
  •  
  • 15. Maldas, D.; Kokta, B. V. Interfacial Adhesion of Lignocellulosic Materials in Polymer Composites: An Overview. Compos. Interfaces 1993, 1, 87-108.
  •  
  • 16. Gauthier, R.; Joly, C.; Coupas, A.; Gauthier, H.; Escoubes, M. Interfaces in Polyolefin/cellulosic Fiber Composites: Chemical Coupling, Morphology, Correlation with Adhesion and Aging in Moisture. Polym. Composite 1998, 19, 287-300.
  •  
  • 17. Lu, J. Z.; Wu, Q.; Negulescu, L. Wood-Fiber/High-Density-Polyethylene Composites: Compounding Process. J. Appl. Polym. Sci. 2004, 93, 2570-2578.
  •  
  • 18. Espert, A.; Camacho, W.; Karlson, S. Thermal and Thermomechanical Properties of Biocomposites Made From Modified Recycled Cellulose and Recycled Polypropylene. J. Appl. Polym. Sci. 2003, 89, 2353-2360.
  •  
  • 19. Stark, N. M.; Matuana, L. M. Surface Chemistry and Mechanical Property Changes of Wood-flour/high-density-polyethylene Composites After Accelerated Weathering. J. Appl. Polym. Sci. 2004, 94, 2263-2273.
  •  
  • 20. Maldhure, A. V.; Chaudhari, A. R.; Ekhe, J. D. Thermal and Structural Studies of Polypropylene Blended with Esterified Industrial Waste Lignin. J. Therm. Anal. Calorim. 2011, 103, 625-632.
  •  
  • 21. Haque, M. M.; Ali, M. E.; Hasan, M.; Islam, M. N.; Kim, H. Chemical Treatment of Coir Fiber Reinforced Polypropylene Composites. Ind. Eng. Chem. Res. 2012, 51, 3958-3965.
  •  
  • 22. Stark, N. M.; Rowlands, R. E. Effects of Wood Fiber Characteristics on Mechanical Properties of Wood/Polypropylene Composites. Wood Fiber Sci. 2003, 35, 167-174.
  •  
  • 23. Ahn, S. H.; Kim, D. S. Effects of Recycled PP Content on the Physical Properties of Wood/PP Composites. Polym. Korea 2014, 38, 129-137.
  •  
  • 24. Seo, Y. W.; Kim, D. S. Effects of Wood Flour Size on the Physical Properties of Polypropylene/Wood Flour Composites. Polym. Korea 2014, 38, 327-332.
  •  
  • 25. Zaini, W. I. J.; Fuad, M. Y. A.; Ismail, Z.; Mansor, M. S.; Mustafah, J. The Effect of Filler Content and Size on the Mechanical Properties of Polypropylene/Oil Palm Wood Flour Composite. Polym. Int. 1996, 40, 51-55.
  •  
  • 26. Wang T. Y.; Tsiang R. C. C.; Liou J. S.; Wu J.; Sheu H. C. Preparation and Characterization of a Star-shaped Polystyrene-b-Poly(ethylene-co-propylene) Block Copolymer as a Viscosity Index Improver of Lubricant. J. Appl. Polym. Sci. 2001, 79, 1838-1846.
  •  
  • 27. Morgan, S.; Ye, Z.; Subramanian, R.; Zhu, S. Higher-molecular-Weight Hyperbranched Polyethylenes Containing Crosslinking Structures as Lubricant Viscosity-index Improvers. Polym. Eng. Sci. 2010, 50, 911-918.
  •  
  • 28. Vegetable Fats and Oils, Eckey, E. W., Ed.; Reinhold: New York, 1954.
  •  
  • 29. Otera, J. Transesterification. Chem. Rev. 1993, 93, 1449-1470.
  •  
  • 30. Kiziltas, A.; Gardner, D. J.; Han, Y.; Yang, H. S. Dynamic Mechanical Behavior and Thermal Properties of Microcrystalline Cellulose (MCC)-filled Nylon 6 Composites. Thermochim. Acta 2011, 519, 38-43.
  •  
  • 31. Oksman, K.; Mathew, A. P.; Bondeson, D.; Kvien, I. Manufacturing Process of Cellulose Whiskers/polylactic Acid Nanocomposites. Compos. Sci. Technol. 2006, 66, 2776-2784.
  •  
  • 32. Qiu, W.; Zhang, F.; Endo, T.; Hirotsu, T. Preparation and Characteristics of Composites of High-crystalline Cellulose with Polypropylene: Effects of Maleated Polypropylene and Cellulose Content. J. Appl. Polym. Sci. 2003, 87, 337-345.
  •  
  • 33. Spoljaric, S.; Genovese, A.; Shanks, R. A. Polypropylene-Microcrystalline Cellulose Composites with Enhanced Compatibility and Properties. Composites Part A: Appl. Sci. Manuf. 2009, 40, 791-799.
  •  
  • 34. Turco, R.; Mallardo, S.; Zannini, D.; Moeini, A.; Di Serio, M.; Tesser, R.; Cerruti, P.; Santagata, G. Dual Role of Epoxidized Soybean Oil (ESO) as Plasticizer and Chain Extender for Biodegradable Polybutylene Succinate (PBS) Formulations. Giant. 2024, 20, 100328.
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2025 Impact Factor : 1.0
  • Indexed in SCIE

This Article

  • 2026; 50(5): 697-703

    Published online Sep 25, 2026

  • 10.7317/pk.2026.50.5.697
  • Received on Apr 16, 2026
  • Revised on Aug 5, 2026
  • Accepted on Aug 8, 2026

Correspondence to

  • Dae Su Kim
  • Department of Chemical Engineering, Chungbuk National University, 1 Chungdaero, Seowongu, Cheongju, Chungbuk 28644, Korea

  • E-mail: dskim@cbnu.ac.kr