• Preparation and Physical Properties of the Polyurethane Microgels Based on Poly(caprolactone) diol/Poly(ethylene glycol)
  • Lim JS, Kim KS, Lee MJ, Lee YG
  • Poly(caprolactone) diol/Poly(ethylene glycol)을 기초로 한 폴리우레탄 마이크로겔의 합성 및 특성
  • 임정수, 김공수, 이무재, 이영근
Abstract
Polyurethane(PU) microgels were synthesized from poly(caprolactone) diol(PCD) and/or poly(ethylene glycol)(PEG), diisocyanate and 1,2,6-hexane triol by solution polymerization method. A critical gelation concentration of the PU microgels with, mole ratios of PCD/PEG were the important factors influencing the formation and property microgel or macrogels. The physical and thermal properties of the PU microgels prepared with depending upon the structure of diisocyanate, mole ratio of PCD/PEG, and molecular weight of PEG were investigated. It was found that PU microgels were distributed by polydisperse, spherical small particles below 300nm and showed the properties of low viscosity.

폴리카프로락톤디올(PCD) 및 폴리에틸렌글리콜(PEG), 디이소시아네이트 및 1,2,6-헥산트리올을 용액중합 방법으로 반응시켜 폴리우레탄(PU) 마이크로겔을 합성하였다. PCD/PEG의 몰비가 다른 마이크로겔의 임계 겔화농도의 성질과 생성에 영향을 주는 중요한 인자임을 알았다. 디이소시아네이트, PCD/PEG의 몰비 및 PEG의 분자량을 달리하여 제조한 PU 마이크로겔의 물리적 및 열적 성질을 실험하였다. PU 마이크로겔은 300nm 이하의 다분산성 구형의 작은 입자로 분포되어 있으며, 저점도 특성을 나타내었다.

Keywords: biodegradable polyurethane; polyurethane microgel; crosslinked microparticle; solution polymerization

References
  • 1. Abrol S, Kambouris PA, Looney ML, Solomon DH, Macromol. Rapid Commun., 18, 755 (1997)
  •  
  • 2. Tobita H, Uemura Y, J. Polym. Sci. B: Polym. Phys., 34(8), 1403 (1996)
  •  
  • 3. Kim KS, Kang SH, Kim JM, J. Korean Ind. Eng. Chem., 9(4), 591 (1998)
  •  
  • 4. Kunz D, Burchard W, Colloid Polym. Sci., 264, 498 (1986)
  •  
  • 5. Naka Y, Yamamoto Y, J. Polym. Sci. A: Polym. Chem., 30, 2149 (1992)
  •  
  • 6. Shashoua VE, Beaman RG, J. Polym. Sci., 33, 101 (1958)
  •  
  • 7. Funke W, British Polym. J., 21, 107 (1989)
  •  
  • 8. Funke W, Walthe K, Polym. J., 17, 179 (1985)
  •  
  • 9. Antonietti M, Sillescu H, Macromolecules, 19, 798 (1986)
  •  
  • 10. Antonietti M, Bremser W, Macromolecules, 23, 3796 (1990)
  •  
  • 11. Chen H, Ishizu K, Fukutomi T, Kakurai T, J. Polym. Sci. A: Polym. Chem., 22, 2123 (1984)
  •  
  • 12. Kim KS, Cho CH, Park MW, Polym. Int., 27, 350 (1992)
  •  
  • 13. Naka Y, Ketsu I, Yamamoto Y, Hayashi K, J. Polym. Sci. A: Polym. Chem., 29, 1197 (1991)
  •  
  • 14. Graham NB, Hayes CMG, Macromol. Symp., 93, 293 (1995)
  •  
  • 15. Graham NB, Mao J, Colloid Surf. A: Physicochemical Engineering Aspects, 118(N), 3 (1996)
  •  
  • 16. Kim KS, Graham NB, J. Ind. Eng. Chem., 4(3), 221 (1998)
  •  
  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2024 Impact Factor : 0.6
  • Indexed in SCIE

This Article

  • 2001; 25(1): 41-48

    Published online Jan 25, 2001

  • Received on Oct 4, 2000