Article
  • Properties of Polyurethane Elastomer. 1. The Effect of Molecular Wright and Composition of Soft Segment
  • Ahn TO, Lee SY, Lee SW, Jeong HM
  • 폴리우레탄 탄성체의 구조와 물성. 1. Soft Segment의 분자량과 함량의 영향
  • 안태완, 이수열, 이상원, 정한모
Abstract
Polyurethane(PU) elastomer was synthesized from poly(tetramethylene glycol) (PTMG), 4.4''-diphenylmethane diisocyanate, and 1,4-butane diol by solution polymerization, and the physical properties of PU elastomers with various molecular weights and compositions of the soft segments (PTMG''s) were studied. As the molecular weight of soft segment was increased, phase segment into two domains of haed segment and soft segment was more evident based on the measurement of thermal and tensile properties, and spectroscopy. The crystallinity of each segment was decreased as the content of the other segment was increased, but the crystallization rate was increased.

Poly(tetramethylene glycol) (PTMG). 4.4''-diphenylmethane diisocyanate, 그리고 1,4-butanediol을 사용하여 폴리우레탄 탄성체를 용액중합하여. 탄성체 내의 soft segment의 함량과 분자량의 변화에 따른 물성의 변화를 조사하였다. Soft segment인 PTMG의 분자량이 클수록 hard segment와 soft segment의 상분리 정도가 큼을 열적성질. 적외선 분광분석, 강신도 거퐁에서 관찰할 수 있었다. 각 segment의 결정화도는 상대편 segment의 함량이 증가함에 따라 감소하나. 결정화 속도는 증가하였다.

Keywords:

  • Polymer(Korea) 폴리머
  • Frequency : Bimonthly(odd)
    ISSN 0379-153X(Print)
    ISSN 2234-8077(Online)
    Abbr. Polym. Korea
  • 2022 Impact Factor : 0.4
  • Indexed in SCIE

This Article

  • 1990; 14(5): 497-505

    Published online Oct 25, 1990

  • 10.7317/pk.
  • Received on Nov 30, -0001
  • Revised on Nov 30, -0001
  • Accepted on Nov 30, -0001

Correspondence to

  • E-mail: